BEAR Silver Parts

This backboard is designed for the Bear Silver basketball system and measures 54 Inch wide by 36 Inch height with 1/2 Inch tempered glass. Please note this does not include the H-bracket mounted to the back of the backboard or the black backboard padding along the bottom and up the sides.

This includes:

• [1] 54x36x1/2 Inch glass with white shooters square and boarder
• [1] Full aluminum frame with L brackets pre-installed
• [8] H-Bracket hardware to attach the aluminum frame the black steel H-bracket

This part replaces the white plastic or black cord that attaches the net to the rim. Note that this cord is NOT coupled, but it does include a metal crimp several inches from the end that functions as a stop. Watch a video on how to replace the net tie.

Version Notes: Older rims that have curly "rim horns" do not need this part. Secondly, this replacement part may not look exactly like your original.

Heavy-duty nylon white net designed for outdoor use. This does not include the net tie. If your rim uses a net tie to hold the net on we recommend checking it to make sure you do not also need a replacement net tie. Video: Watch a video on how to replace the net

This includes:

• [1] White Nylon Net

54 Inch backboard padding can be mounted on any of our 54 Inch by 36 Inch backboards. This padding is a foam coated with a latex coating to resist the elements. It covers the edge of the bottom third of the backboard.

This includes:

• [1] 54 Inch Left Side Backboard Padding
• [1] 54 Inch Right Side Backboard Padding
• [1] Stainless Steel Hardware kit package for mounting the backboard padding

A replacement rear wheel for the BEAR. It is the smaller of the two wheel types on the BEAR, and each BEAR uses 2 of them.

Fits: all BEAR models (Silver, Gold and Platinum).

This includes:

• [1] Bear Back Wheel

A replacement front wheel for the BEAR. It is the larger of the two wheel types on the BEAR, and each BEAR uses 2 of them.

Fits: all BEAR models (Silver, Gold and Platinum).

This includes:

• [1] Bear Front Wheel

The square bottom base pad for the BEAR. It is 1 of the 2 base pads; the triangular upper base pad is sold separately.

Fits: all BEAR models (Silver, Gold and Platinum).

This includes:

• [1] Bear Bottom Padding (square base pad)

The triangular upper base pad for the BEAR. It is 1 of the 2 base pads; the square bottom base pad is sold separately.

Fits: all BEAR models (Silver, Gold and Platinum).

This includes:

• [1] Bear Triangular Padding (upper base pad)

A left and right set of extension arm pads for the BEAR. The pads mount under the main extension arm with self-tapping screws, which are not included.

Fits: all BEAR models (Silver, Gold and Platinum).

This includes:

• [1] Left side extension arm pad
• [1] Right side extension arm pad
• Mounting screws NOT included

The small Lightning Adjust actuator lets you raise and lower your system with a cordless drill or by hand with the manual crank. It includes the cylinder, gear box, manual crank handle and drill holster, and it fixes just about any height adjustment problem. Swapping out a standard hand crank actuator takes about 10 minutes.

Any name brand 18 to 24 volt battery powered drill can be used with Lightning Adjust. If you don't have a drill, one is available in the parts section. If you've misplaced the manual crank handle, it is also sold separately.

Fits: THOR Gold (formerly Pro Dunk Gold), THOR Silver (formerly Pro Dunk Silver), and all BEAR models (Silver, Gold and Platinum). On the BEAR it replaces the original Bear Actuator, which we no longer carry.

BEAR owners: the manual hand crank is guaranteed to work on every BEAR model. Most drills don't have enough torque to raise a BEAR, especially the BEAR Platinum. If your drill does work, feel free to use it. Never use a corded (A/C powered) drill or an impact drill of any kind.

• Full details
• Installation video
• Installation instructions
• Replacement instructions

This includes:

• [1] Lightning Adjust [Small]
• [1] Lightning Adjust Socket
• [1] Preassembled Drill Holster
• [1] Manual Hand Crank
• DOES NOT INCLUDE DRILL

A replacement or spare drill bit adapter for the Lightning Adjust actuator. It connects your drill to the Lightning Adjust and is the part to order if your original adapter has been misplaced.

Fits: the Lightning Adjust Large and Lightning Adjust Small on any THOR or BEAR system. It does NOT work on standard actuators that have a permanently attached adjustment handle.

BEAR owners: your drill may not be strong enough to raise a BEAR with the drill feature, especially the BEAR Platinum. The manual hand crank will always work.

This includes:

• [1] Lightning Adjust Drill Bit Adapter

The BEAR height sticker is applied to the spring assist and shows the height of the system when used with the steel height meter. All BEAR models use the same height sticker.

Fits: all BEAR models (Silver, Gold and Platinum).

This includes:

• [1] Bear Height Sticker Only

The height meter and sticker are used to measure the height of the system at any given time.

Fits: all BEAR models (Silver, Gold and Platinum).

This includes:

• [1] Bear Height Sticker
• [1] Steel Height Meter

Hoops Breakaway rim features a dual spring system designed to break downwards when a player dunks on it. Video: Replace Your Net

This includes:

• [1] Hoops Breakaway Rim Plate Cover
• [2] Phillips head screws for the rim plate cover
• [1] Hoops Breakaway Rim
• [1] Net
• [4] Rim bolt with washer, lock washer, and hex nut
• Does NOT include rim spacers

Includes 4 stainless steel rim bolts, washers, and hex nuts to install the rim to the backboard. Please note, that this does not include the 4 rim spacers that go between the rim and backboard. They are sold separately.

This includes:

• [4] 7cm x 10mm hex bolt with a 17mm socket head
• [4] 10mm hex nut with 17mm socket head
• [8] 10mm flat washer
• [4] 10mm lock washer

Includes 4 rim spacers that mount the rim off the backboard so it does not touch the glass. They must be installed before the rim. Each rim spacer is a steel insert coated in soft plastic.

This includes:

• [4] Rim Spacer

Replacement Phillips head screws that attach the rim plate cover on Hoops Breakaway rims with pre-threaded holes.

Fits: Hoops Breakaway rims with pre-threaded rim plate holes. Rims made before 2015 most likely use self-tapping screws instead. We no longer carry those, but you can usually find them at a local hardware store.

This includes:

• [2] Phillips head rim plate screw

This kit includes 8 stainless steel bolts, nuts and washers used to mount the H-bracket to the aluminum frame on the backboard. 4 are used on the top and 4 are used on the bottom securing it in the center of the backboard.

Version Notes: Please measure and verify you have the same size bolts before ordering. All measurements can be found below. If you have different size bolts please submit a support request at produnk.com/support.

This includes:

• [8] 3 1/2cm x 8mm hex bolt with a 13mm socket head
• [8] 8mm small washer
• [8] 8mm large washer
• [8] 8mm lock washer
• [8] 8mm hex nut with a 13mm socket head