ROOF KING Gold Parts

This backboard is designed for the Roof King Platinum basketball system and measures 48 Inch wide by 36 Inch height with 3/8 Inch tempered glass. Please note this does not come with any hardware and it does not include the H-bracket mounted to the back of the backboard.

This includes:

• [1] 48x36x3/8 Inch tempered glass with white shooters square and boarder
• [1] Full aluminum frame with L brackets pre-installed

This part replaces the white plastic or black cord that attaches the net to the rim. Note that this is cord is NOT coupled but does included a metal crimp several inches from the end that functions as a stop. Watch a video on how to replace the net tie.

Version Notes: Older rims that have curly "rim horns" do not need this part. Secondly, this replacement part may not look exactly like your original.

Heavy-duty nylon white net designed for outdoor use. This does not include the net tie. If your rim uses a net tie to hold the net on we recommend checking it to make sure you do not also need a replacement net tie. Video: Watch a video on how to replace the net

This includes:

• [1] White Nylon Net

Hoops Breakaway rim features a dual spring system designed to break downwards when a player dunks on it. Video: Replace Your Net

This includes:

• [1] Hoops Breakaway Rim Plate Cover
• [3] Self-Tapping screws for the rim plate cover
• [1] Hoops Breakaway Rim
• [1] Net
• [4] Rim bolt with washer, lock washer, and hex nut
• Does NOT include rim spacers

Includes 4 stainless steel rim bolts, washers, and hex nuts to install the rim to the backboard. Please note, that this does not include the 4 rim spacers that go between the rim and backboard. They are sold separately.

This includes:

• [4] 7cm x 10mm hex bolt with a 17mm socket head
• [4] 10mm hex nut with 17mm socket head
• [8] 10mm flat washer
• [4] 10mm lock washer

Includes four rim spacers and are used to mount the rim off the backboard so that it does not touch the glass. These are required to be installed before the rim. The rim spacer is a steel insert that is coated in soft plastic.

This includes:

• [4] Rim Spacer

Stainless steel self-tapping screw designed to mount the rim plate cover to the underside of the rim. This plate covers the springs and internal workings of the rim. Two are needed to mount the rim plate cover to the rim. Each measures 3cm long and 6mm in diameter with a 10 mm socket head.

This includes:

• [1] 3cm x 6mm self-tapping screw with a 10 mm socket head

The hardware used to put the Roof King bracket together and the 10 lag bolts that hold the bracket to the roof. This also includes the 4 bolts used to mount the backboard H-bracket to the Roof King bracket. Hardware is all stainless steel designed for outdoor use.

This includes:

• [10] 5cm x 8mm lag bolt
• [8] 8mm plastic spacer
• [6] 8cm x 8mm hex bolt
• [6] 8mm locking hex nut
• [4] 8mm flat washer
• [2] 3cm x 8mm hex bolt

The Roof King H-bracket is designed to connect the backboard to the Roof King Bracket. This is a black structure that mounts to the top and bottom of the backboard aluminum frame using 8 bolts and nuts.

This includes:

• [1] Roof King H-Bracket (without hardware)

The includes 8 stainless steel bolts, nuts and washers and are used to mount the H-bracket to the aluminum frame on the backboard. 4 are used on the top and 4 are used on the bottom securing it in the center of the backboard.

Version Notes: Please measure and verify you have the same size bolts before ordering. All measurements can be found below. If you have different size bolts please submit a support request at www.produnk.com/support.

This includes:

• [8] 3 1/2cm x 8mm hex bolt with a 13mm socket head
• [8] 8mm small washer
• [8] 8mm large washer
• [8] 8mm lock washer
• [8] 8mm hex nut with a 13mm socket head

The Roof King bracket system that mounts to the roof top. This includes the bracket and the hardware used to assemble the bracket. This does not included the backboard, h-bracket and rim spacers.

This includes:

• [1] Roof King Bracket System
• [10] 5cm x 8mm lag bolt
• [8] 8mm plastic spacer
• [6] 8cm x 8mm hex bolt
• [6] 8mm locking hex nut
• [4] 8mm flat washer
• [2] 3cm x 8mm hex bolt