HERCULES Gold Parts

The Standard Pier Kit is designed using 4 high grade galvanized j-bolts to mount the main pole to the concrete. The pier kit is usually used when moving the system and installing a new base for the system. This does not include the rebar needed for the installation, but you can pick this up at your local hardware store.

Version Notes: The Standard Pier Kit will work on the Pro Dunk Bronze, Pro Dunk Silver, Pro Dunk Gold, Pro Dunk Platinum, Hercules Gold and Hercules Platinum.

This includes:

• [1] Standard Pier Kit Template Plate
• [4] J-bolt 40cm x 10cm x 16mm
• [8] 16mm hex nut
• [4] 16mm hex nut with built in lock washer
• [8] 16mm flat washer

This backboard is designed for the Hercules Gold basketball system and measures 60 Inch wide by 36 Inch height with 1/2 Inch tempered glass. Please note this does not come with any hardware and it does not include the H-bracket mounted to the back of the backboard.

Version Notes: Verify your backboard is 36" tall and not 38" tall. If you have a 38" tall backboard please email our support department at [email protected].

This includes:

• [1] 60x36x1/2 Inch glass with white shooters square and boarder
• [1] Full aluminum frame with L brackets pre-installed

This part replaces the white plastic or black cord that attaches the net to the rim. Note that this is cord is NOT coupled but does included a metal crimp several inches from the end that functions as a stop. Watch a video on how to replace the net tie.

Version Notes: Older rims that have curly "rim horns" do not need this part. Secondly, this replacement part may not look exactly like your original.

Heavy-duty nylon white net designed for outdoor use. This does not include the net tie. If your rim uses a net tie to hold the net on we recommend checking it to make sure you do not also need a replacement net tie. Video: Watch a video on how to replace the net

This includes:

• [1] White Nylon Net

6x6 Inch gusset padding is used on the Pro Dunk Gold, Hercules Platinum and Hercules Gold main pole and covers the base of the main pole for safety. This does not include the pole padding that covers the majority of the main pole.

Version Notes: The 6x6 Black Gusset Padding is designed for the Pro Dunk Gold, Hercules Platinum and Hercules Gold that has a 6x6 main pole. Older Pro Dunk Gold systems might use 5x5 Gusset Padding. This can be found under the Pro Dunk Silver parts list. Navigate to www.produnkhoops.com/parts and select Pro Dunk Silver.

This includes:

• [1] 6x6 Inch Fitted Black Gusset Pad

6x6 Inch pole padding is used on the Pro Dunk Gold, Hercules Platinum and Hercules Gold main pole and covers the bottom 2/3 of the main pole for safety.

Version Notes: The 6x6 Black Pole Padding is designed for the Pro Dunk Gold, Hercules Platinum and Hercules Gold that has a 6x6 main pole. Older Pro Dunk Gold systems might use 5x5 Pole Padding. This can be found under the Pro Dunk Silver parts list. Navigate to www.produnkhoops.com/parts and select Pro Dunk Silver.

This includes:

• [1] 6x6 Inch Fitted Black Pole Pad

60 Inch backboard padding can be mounted on any of our 60 Inch by 36 or 38 Inch backboards. This padding is a foam coated with a latex coating to resist the elements. It covers the edge of the bottom third of the backboard.

This includes:

• [1] 60 Inch Left Side Backboard Padding
• [1] 60 Inch Right Side Backboard Padding
• [1] Stainless Steel Hardware kit package for mounting the backboard padding

Hoops Breakaway rim features a dual spring system designed to break downwards when a player dunks on it. Video: Replace Your Net

This includes:

• [1] Hoops Breakaway Rim Plate Cover
• [3] Self-Tapping screws for the rim plate cover
• [1] Hoops Breakaway Rim
• [1] Net
• [4] Rim bolt with washer, lock washer, and hex nut
• Does NOT include rim spacers

This includes 4 stainless steel rim bolts to mount the rim to the backboard. Specifically designed for the Hercules Diamond, Hercules Platinum, and Hercules Gold.

Version Notes: Please measure and verify you have the same size bolts before ordering. All measurements can be found below. If you have different size bolts please submit a support request at www.produnk.com/support.

This includes:

• [4] 8cm x 10mm hex bolt with a 17mm socket head
• [4] 10mm hex nut with 17mm socket head
• [8] 10mm flat washer
• [4] 10mm lock washer

Includes four rim spacers and are used to mount the rim off the backboard so that it does not touch the glass. These are required to be installed before the rim. The rim spacer is a steel insert that is coated in soft plastic.

This includes:

• [4] Rim Spacer

Stainless steel self-tapping screw designed to mount the rim plate cover to the underside of the rim. This plate covers the springs and internal workings of the rim. Two are needed to mount the rim plate cover to the rim. Each measures 3cm long and 6mm in diameter with a 10 mm socket head.

This includes:

• [1] 3cm x 6mm self-tapping screw with a 10 mm socket head

8 22cmx18mm bolts are used to mount the Hercules Platinum/Gold main extension arm to the main pole. Please note this only comes with 1 of the main bolts. If you need a complete set please purchase 8 of these.

Version Notes: If your system has 6 bolts total that mount the main extension arm to the main pole this hardware kit will not work for you. Please submit a support request for the parts you are in need of. This can be done at www.produnkhoops.com/support.

Please measure and verify you have the same size bolts before ordering. All measurements can be found below. If you have different size bolts please submit a support request at www.produnkhoops.com/support.

This includes:

• [1] 22cmx18mm bolt, washers, lock washer and hex nut

This bolt kit is for the Hercules Platinum and Gold extension arms. This kit comes with 4 bolts used to mount the small extension arm to the main extension arm and 6 bolts used to mount the small and large extension arm to the H-bracket on the back of the backboard. This does not include the 8 main bolts used to mount the main extension arm to the main pole and does not include the 4 bolts used to mount the rim to the backboard.

Please measure and verify you have the same size bolts before ordering. All measurements can be found below. If you have different size bolts please submit a support request at www.produnkhoops.com/support.

This includes:

• [4] 3cmx10mm bolt, washer, and lock washer
• [6] 4cmx10mm bolt, washer, lock washer and hex nut

The Hercules Gold H-bracket (with rust armor) is designed to connect the backboard to the main extension arm and the small extension arm. This is a black structure that mounts to the top and bottom of the backboard aluminum frame using 8 bolts and nuts.

This includes:

• [1] Hercules Gold H-Bracket (without hardware)

The includes 8 stainless steel bolts, nuts and washers and are used to mount the H-bracket to the aluminum frame on the backboard. 4 are used on the top and 4 are used on the bottom securing it in the center of the backboard.

Version Notes: Please measure and verify you have the same size bolts before ordering. All measurements can be found below. If you have different size bolts please submit a support request at www.produnk.com/support.

This includes:

• [8] 3 1/2cm x 8mm hex bolt with a 13mm socket head
• [8] 8mm small washer
• [8] 8mm large washer
• [8] 8mm lock washer
• [8] 8mm hex nut with a 13mm socket head

The Hercules Platinum/Gold main pole is an 6x6 Inch steel pole with 7 gauge thick steel walls.

This includes:

• [1] 6x6 Inch Hercules Platinum/Gold Main Pole with Rust Armor

Hercules Platinum/Gold Main extension arm connects the main pole to the H-bracket mounted on the back of the backboard. The small extension arm also connect to the main extension arm which then connects to the H-bracket as well.

Version Notes: If there are 6 bolts holding your main extension arm to the main pole this extension arm will not work. You must have 8 main bolts holding the main extension arm to the main pole.

This includes:

• [1] Hercules Platinum/Gold Main Extension Arm With Rust Armor

Hercules Platinum/Gold small extension arm connects to the main extension arm and the H-bracket on the back of the backboard.

This includes:

• [1] Hercules Platinum/Gold Small Extension Arm With Rust Armor

Hercules Platinum/Gold Main extension arm plate is letter F in the installation instructions. This plate is used to bolt the main extension arm to the main pole by sandwiching the main pole between the extension arm plate and the main extension arm.

Version Notes: If there are 6 bolts holding your main extension arm to the main pole this extension arm plate will not work. You must have 8 main bolts holding the main extension arm to the main pole.

This includes:

• [1] Hercules Platinum/Gold Main Extension Arm Plate With Rust Armor